中空玻璃打膠機電路氣路應該如何安裝?
中空玻璃打膠機減輕了工人的工作難度，節省了成本、提高了效率。中空玻璃打膠機屬于中空玻璃生產設備之一，是目前中小型企業選擇的設備。那么中空玻璃打膠機電路氣路應該如何安裝呢？下面小編給大家介紹下。
The hollow glass gluing machine reduces the working difficulty of the workers, saves the cost and improves the efficiency. Insulating glass gluing machine is one of the insulating glass production equipment, which is currently selected by small and medium-sized enterprises. So how to install the air circuit of the insulating glass dispenser? Now I'll introduce you to Xiaobian.
1、將中空玻璃打膠機平整的放在地面上。
1. Put the insulating glass gluing machine on the ground.
2、連接三相四芯線，其中黃綠紅為火線，藍色為零線。一定要注意的是黃綠紅三根火線一定要連接在對應的L1、L2、L3下方，藍色零線連在對應的N下方，千萬不要接錯了喲
2. Connect three-phase four core wires, of which yellow green red is the live wire and blue is the zero wire. It must be noted that the yellow green red three live wires must be connected under the corresponding L1, L2 and L3, and the blue zero wire must be connected under the corresponding n. do not connect them wrong
3、第三步是很細微但是很重要的，就是在連接完之后要確認一下連接是否牢固，避免出現事故
3. The third step is very subtle, but it is very important to confirm whether the connection is firm after the connection to avoid accidents
4、第四步連接氣管，氣泵輸出氣管連接一個三通，一路連接打打膠機上，另外的一路連接到供膠機上。
4. The fourth step is to connect the air pipe. The output air pipe of the air pump is connected to a three-way pipe. One is connected to the beater and the other is connected to the glue feeder.
5、第五步同樣是需要檢查的環節，打開氣泵送氣，檢查各氣壓表是否正常。
5. The fifth step is also the link to be checked. Turn on the air pump to supply air and check whether the air pressure gauges are normal.
6、第六步閉合空開，送電后打開人機界面，檢查是否正常。
6. Step 6 close the air switch, open the man-machine interface after power transmission, and check whether it is normal.
以上就是關于中空玻璃打膠機電路氣路的安裝方式，希望可以幫助到大家。
The above is about the installation of the air circuit of the hollow glass dispenser. I hope it can help you.
上一篇：如何有效解決自動點膠機拉絲問題？
下一篇：點膠機的點膠技術的簡單化！
