蜜桃av噜噜一区二区三区-蜜桃av麻豆av果冻传媒-蜜桃av亚洲精品一区二区-蜜桃bt天堂精品视频在线观看-蜜桃成人无码区免费视频网站-蜜桃福利视频

All the equipments need to be repaired before leaving the factory. Automatic dispenser as a precision instrument, the maintenance process is more strict. The general process is mainly divided into three steps: first, the commissioning process of the automatic dispensing machine; second, the verification and installation process before delivery; third, the commissioning process to the manufacturer. Moreover, it should be accompanied by relevant certificates of commodities. Here, the method of judgment is listed for your reference.

一、檢修需求：

1、 Maintenance requirements:

1.全自動點膠機的外觀不能泛起影響正常工作和正常讀數的機械損傷和侵蝕，表面噴漆平整，厚度平均，無雜質。

1. The appearance of the automatic dispenser shall not cause mechanical damage and erosion that may affect normal operation and normal reading. The surface shall be smooth with average thickness and no impurities.

2.內部器件與表殼的連接牢固，電控柜內線路整潔，線號齊全，設備內部無異響

2. The internal devices and the watch case are firmly connected, the lines in the electric control cabinet are clean, the wire numbers are complete, and there is no abnormal sound inside the equipment

3.表盤上的刻度和數字應清晰，無痕跡

3. The scale and number on the dial should be clear without trace

4.設備能夠自行運行，運行不亂可靠，無異常響動，可以連續運行一周，無端障發生。

4. The equipment can run on its own without disorder and reliability, without abnormal sound, and can operate continuously for a week without end barrier.

5.啟動點膠機，點膠機顯示器正常顯示參數，氣壓計顯示無顯著波動。

5. Start the dispenser, the dispenser display will display normal parameters, and the barometer display will not fluctuate significantly.

6.啟動點膠機控制按鈕，出氣口有氣流沖出，并且可以按照設置的出氣時間和回吸時間完成動作。無漏氣題目

6. Start the dispenser control button, the air outlet has air flow, and the action can be completed according to the set exhaust time and suction time. No air leakage

7.全自動點膠性能夠進行連續性出產24小時以上，設備整體美觀大方，布局公道，設備各部件不能有漏電，漏水,漏油等現象。

7. The full-automatic gluing can be continuously produced for more than 24 hours. The overall appearance of the equipment is elegant and the layout is fair. All parts of the equipment can not have leakage, water leakage and oil leakage.

8.在全自動點膠機的試運行期間，無重要部件的損壞(人為原因除外)重要部件包括：電磁閥,電機,油馬達,油泵,鏈條,油缸,PLC以及電腦等。

8. During the trial operation of the automatic dispensing machine, there is no damage to important parts (except for human reasons). The important parts include: solenoid valve, motor, oil motor, oil pump, chain, oil cylinder, PLC and computer.

9.出產的產品，知足質量、節拍等合同需求(模具原因除外)。

9. The products produced shall meet the contract requirements of quality and beat (except for mould reasons).

二、全自動點膠機的全部技術資料預備齊全

2、 All technical data of automatic dispensing machine are ready

1.全自動點膠機操縱維護保養仿單：設備整體平面布置圖、電氣原理圖、工作原理圖、氣動、液壓原理圖，

1. Operation and maintenance copy sheet of automatic dispenser: overall layout of equipment, electrical schematic diagram, working principle diagram, pneumatic and hydraulic schematic diagram,

2.全自動點膠機培訓資料，光盤。

2. Safety training materials and CD for automatic dispenser.

3.備件明細表

3. Spare parts list

4.計量儀器、儀表應提供計量合格證

4. Measuring instruments and meters shall be provided with measurement certificate

全自動點膠機安裝完成后，進行試出產，試出產中同時對系統參數進行調試。 試出產一個月后,雙方進行全自動點膠機的正式檢修. 在設備調整期間泛起非人為破壞的質量題目均可視為分歧格商品。

After the installation of the automatic dispensing machine, the trial production is carried out, and the system parameters are debugged during the trial production. After one month of trial production, the two sides carry out the formal maintenance of the automatic dispenser. During the adjustment of the equipment, the quality problems caused by non-human damage can be regarded as different goods.