雙液點膠機的應用及維護方法
雙液點膠機每次灌完膠后要及時清洗，并且要清洗干凈，否則的話，膠水固化把閥門堵住了，再下次點膠時，就會出現膠水點不出來的現象。如果沒有清洗干凈，下次使用另一種膠水灌膠時，會造成多種膠水混合，使現在正在點或者灌的膠水中毒，進而出現點出來的產品膠水不干，品質出現問題等系列現象。
The two liquid dispensing machine should be cleaned in time and cleaned after each time. Otherwise, if glue is solidified, the valve will be blocked. When the glue is dispensed again, glue will not come out. If it is not cleaned, the next time when using another glue to glue, it will cause a variety of glue mixing, so that the glue that is now being irrigated or irrigated, and then there will be a series of phenomena such as the glue and water coming out of the product and the quality problems.
應用領域：
Application areas:
目前雙液點膠機主要應用于LED模組灌封，LED燈灌封，變壓器灌封，傳感器灌封，汽車點火線圈灌封，PCB集成電路板灌封等。
At present, the two liquid dispensing machine is mainly applied to LED module encapsulation, LED energy saving lamp encapsulation, transformer sealing, sensor sealing, automobile ignition coil sealing, PCB integrated circuit board sealing and so on.
膠水里面有沒有填料，如氧化鋁，氧化硅，石英砂，陶瓷等。如果有填料，在選用雙液灌膠機時，就需要謹慎考慮。目前雙液灌膠機控制出膠量的方式有兩種，一種是通過齒輪泵，一種是通過螺桿泵！齒輪泵在遇到含有填料的膠水時，時間久了易磨損，進而造成出膠量不準，混合比例不精確，出現點出來的產品長時間不干。
There are no fillers in the glue, such as alumina, silicon oxide, quartz sand, and ceramics. If there is a filler, it is necessary to take careful consideration when choosing a double liquid filling machine. At present, there are two ways to control the amount of glue by the double liquid glue machine, one is through the gear pump and the other is through the screw pump. When the gear pump meets the glue containing filler, it will wear easily for a long time, resulting in the amount of glue not allowed, the proportion of mixing is not precise, and the product that comes out will not work for a long time.
我們每個環節分工明確，為客戶提供化的服務。但我們也深知，行業競爭愈演愈烈，前路依然波折艱難，因?yàn)橛心男湃闻c支持，讓我們有信心做得更好，也走得更遠，我們將永遠保持一貫務實求精的精神、飽滿的工作熱情，為廣大客戶送去理想的產品。
We have a clear division of labor in each link, providing professional services for our customers. But we also know that the industry competition intensified, the road is still difficult because of twists and turns, with your trust and support, let us have confidence to do better, but also to go further, we will always maintain a consistent and pragmatic refinement of the spirit, full of enthusiasm, for our customers to send the most ideal products.
上一篇：淺析風電葉片設備裂紋維護方法
下一篇：雙組份打膠機的性能及介紹
