中空玻璃設備的強度和硬度是如何進行分別的？
中空玻璃在使用的整個壽命周期中要不斷受到外界環境腐蝕及外力作用，在使用一段時間后部分中空玻璃會出現各種質量問題，其中主要有兩種：一是中空玻璃密封性能失效（氣體泄漏），使中空玻璃產生露點，并失去保溫隔熱功能；二是中空玻璃炸裂及外片整體脫落，容易造成嚴重的隱患。
Insulating glass in the use of the entire life cycle to constantly subject to external environmental corrosion and external force, in use for a period of time, some insulating glass will appear a variety of quality problems, which mainly have two kinds: one is the insulating glass sealing performance failure (gas leakage), so that the hollow glass dew point, and lose the function of heat insulation; the other is the insulating glass burst and the whole outer sheet Fall off, easy to cause serious security risks.
一般平板玻璃或鋼化玻璃，那么依據玻璃強度設計理論，玻璃原片的斷裂強度就斷定下來了。因?yàn)橹锌詹ＡC(jī)器出產的是由兩塊玻璃組成的玻璃，周邊密封構成一個密封的空氣層，中空玻璃在一面玻璃遭到載荷作用時，受力面玻璃變形緊縮中空層氣體，氣體壓強加大。將有些載荷傳送給另一面玻璃，因此在氣體密封狀態下，中空玻璃是兩片玻璃一起承當載荷，兩片玻璃一起變形。
General flat glass or tempered glass, then according to the glass strength design theory, the breaking strength of the original glass is determined. Because the insulating glass machine produces a glass composed of two pieces of glass, and the surrounding seal forms a sealed air layer. When one side of the insulating glass is loaded, the stressed side of the glass deforms and contracts the gas in the insulating layer, and the gas pressure increases. Some loads are transmitted to the other side of the glass, so in the gas sealed state, two pieces of insulating glass bear the load together, and the two pieces of glass deform together.
這就是小編為大家講解的中空玻璃設備的強度與剛度的分析。希望可以幫助到大家，更多精彩內容請關注：http://m.zkty.org.cn
This is the analysis of the strength and stiffness of insulating glass equipment explained by Xiaobian. I hope I can help you. Please pay more attention to: http://m.zkty.org.cn
上一篇：濟南雙組份打膠機耗電量高不高？
下一篇：雙組份打膠機在使用中應該怎樣維護
